Beewraps by Malu is a food packaging material designed and produced by a Polish family company to replace food foil, aluminum foil or disposable plastic containers with a biodegradable and reusable alternative.
You are here
reWINE LIFE is a Catalonian project, running from 2016 to 2020 and co-financed by the EU's LIFE Programme. It sought to demonstrate the viability of reusing glass bottles in the local wine industry.
Orybany is an ethical concept store located in the heart of Brussels working with a community of artisans and designers connected by the same values: "Human, Ethical and Diversity".
Veolia has been extending the useful life of plastic bottles using a PET (Poly Ethylene Terephthalate) plastic recycling process. A mechanical and chemical recovery process transforms the PET flakes into a product suitable for use with food.
Veolia has developed expertise and built specific facilities to tackle the complex process of treating, depolluting and dismantling Waste Electrical and Electronic Equipment (WEEE). This is a valuable source of recyclable raw materials: ferrous metals, plastics and precious metals can all be recovered and reused.
The SAWYER project: identifying skills and safety needs for the furniture sector's circular transition
The SAWYER project aims to facilitate the transition of European furniture companies to a more circular economy. The project ran from February 2020 to March 2021, studying the main legislative and voluntary instruments that can facilitate this transition.
I:CO is an international circular solutions provider for the collection, certified sorting, reuse and recycling of clothing and shoes. They aim to support innovative new recycling technologies which help close the loop of production cycles.
SOUJI is a liquid based on minerals and vegetables that, when mixed in the correct proportions with used cooking oil, and after shaking the mixture for 1 minute, becomes a cleaning agent/detergent which is 96% less polluting than a common detergent.
SIGUREC is the most advanced household waste collection service currently operating in Romania. It is a broad initiative, implemented following an official agreement between private companies and public authorities.
The Data Centre Industry (DCI) is one of the most important pillars of current technological and economic developments.
In DCIs, more than fifty different materials can be found per product, including ferrous, non-ferrous metals, precious metals (PM), platinum group metals (PGM), rare earth elements (REE), plastics and/or ceramics, some being considered as Critical Raw Materials (CRMs).
This assessment aims to study DCI design and material composition (specifically servers and switches), as well as to analyse their performance in a circular economy and provide recommendations for ecodesign guidelines.
How can the EU product safety and compliance framework help promote product durability and tackle planned obsolescence, foster the production of more sustainable products, and achieve more transparent supply chains for consumers?
Product longevity can play a useful role in achieving the Paris Agreement goals – material efficiency is an important contributor to energy efficiency and is also important in its own right. The product safety and compliance instruments available at European level can contribute to these efforts, if wisely applied.
This study was commissioned by the European Parliament Committee on Internal Market and Consumer Protection (IMCO).
The fashion industry has a big influence on the global economy and is known for its social and environmental impact. This online course by Wageningen University & Research is an introduction to circular fashion, brought by 30 experts from academia and practice.
After this course, you will be able to:
- Understand the role of sustainability and circularity in fashion
- Understand the importance of design for disassembly and recycling
- Evaluate new biobased materials for textiles and understand the change in production processes
- Disrupt current thinking and mindset in the industry and manage the transition to circular fashion
- Understand economic paradigms and new forms of value creation for circularity in the fashion industry
Read more and enrol.
The circular economy's closed loop and product service systems for sustainable development: A review and appraisal
This review paper of Mark Anthony Camilleri examines relevant regulatory guidelines, policies, and recommendations on sustainable development, where it traces the origins of circular economy (CE). It goes on to shed light on key theoretical underpinnings of CE's closed loop and product service systems.
The findings suggest that the CE's regenerative systems minimise the environmental impact as practitioners reduce their externalities, including waste, emissions, and energy leakages through the use and reuse of resources. Therefore, this contribution offers a critique on CE's inherent limitations and discusses about the implications of having regulatory interventions that are intended to encourage responsible consumption and production behaviours.
Le secteur de l’événementiel est plus que jamais concerné par les enjeux de durabilité et de préservation des ressources. Conscients de la nécessité de concilier l’organisation d’événements et l’économie circulaire, les acteurs du secteur doivent se mobiliser davantage afin de mettre en œuvre les leviers d’action existants.
Dans le cadre de la nouvelle loi française, de nombreuses mesures sont pertinentes:
- Des objectifs de réduction des emballages plastiques et la fin du plastique jetable en 2040
- La lutte contre le gaspillage (alimentaire)
- Les mesures favorisant le réemploi et la réutilisation
- La gestion et la valorisation des déchets
- Les dispositions relatives aux filières à responsabilité élargie des producteurs (REP) engageant une réflexion sur la filière événementielle
Today, only 8.6% of the resources and materials in the global economy are reused or recycled.
A crucial transition to a circular economy is required to reach the environmental goals of the 2030 Agenda for Sustainable Development and to achieve countries’ climate targets as set out in the 2015 Paris Agreement.
In this context, it is essential to ensure that the transition to a resource-efficient and circular economic model also delivers on social objectives.
This paper introduces the relevance of the circular economy in the international development SDG context. It also explores how a just transition approach can be successfully applied in the circular economy context.
The URBANREC project: new approaches for recovery of urban bulky waste to create high added-value recycled products
Despite continuous advances in municipal waste management, there are still several waste streams that offer limited opportunities for material recovery and thus end up in landfills and incineration plants.
One challenging stream is the “bulky waste”, defined by the URBANREC project as “(mixed) waste from households and similar waste from companies that does not fit (because of its size, shape or weight) in the regular receptacles used for household waste collection".
In this context, the URBANREC project aims to develop and implement a comprehensive eco-innovative bulky waste management system (to enhance prevention and reuse, improve logistics and develop new waste treatment methods to obtain high added-value recycled products) and show its effectiveness in different regions.
Research on Remelting and Purification of Si-kerf for PV wafers is part of CABRISS, a European collaboration aimed to develop a circular economy mainly for the photovoltaic but also other industries such as electronics or metallurgy.
During production of silicon wafers out of silicon (Si) ingots and wafers, about 40–50% of the material is lost due to the cutting technique. The research had kerf from slurry based wafer cuttings undergoing several refining steps and being remelted into ingots for PV-application.
Conclusion: With 10% refined material, ingots were still directionally solidified, whereas with 100% refined material, they were not. The presented refining method does not allow for ingots with 100% refined material to be used as PV-material.
The project Recycling of broken Si based structures and solar cells is part of CABRISS, a European collaboration aimed to develop a circular economy mainly for the photovoltaic (PV), but also for other industries such as electronics or metallurgy.
The paper presents some tests in which broken solar cell structures coming from an early stage in the PV production process chain as well as broken finished solar cells have been recycled into new silicon (Si) feedstock through demetallisation, purification and directional solidification.
The paper explores two different routes to remove diffusion layers and anti-reflection coating (ARC) on broken cells. It also presents the characteristics of ingots produced with the Si-feedstock from the two routes by directional solidification.
In a resource-constrained world the future economy will need to be circular.
From a policy perspective, the question is whether averting catastrophic environmental impacts through an accelerated transition to a global circular economy can also deliver sustained growth and jobs.
Multiregional input−output (MRIO) analysis models the interdependencies between industries and within/between countries as well as between intermediate and final goods producers and consumers, thus providing a useful toolbox for assessing social, environmental, and economy-wide impacts of the adoption of the circular economy.
This research paper resorts to this toolbox to compare the business-as-usual (BAU) scenario to an alternative circular economy scenario.
The CL-HUB project organises a series of training webinars (in Italian) on the circular economy for Italian businesses. In these five seminars, participants will learn how to use worthwhile circular economy approaches for the success of business activities.
An online study tour on re-use & repair for municipalities and public waste companies which aims to create an inclusive circular economy at local level.
Pantheon Performance Foundation is organising a series of webinars to take place on 15, 16 and 17 December 2020 from 3 to 4.30 p.m. (CET), focusing on policy, technology and practice in the field of reducing CO2 emissions from concrete manufacturing and use. It aims to draw up a manual of sustainable materials for CO2 neutral constructions.
Always wondered how the circular economy could help your city/region in its energy transition? This FEDARENE webinar on The energy dimension of the circular economy is for you!
The 2021 ACI European Food & Beverage Plastic Packaging Summit will focus on reusing and recycling plastic packaging and future directions and scientific development in this field. It will also review relevant European legislation.
On 4 November 2020 (3:30 p.m.), as a side event to the Circular Economy Stakeholder Conference, the OECD will prepsent its synthesis report onThe Circular Economy in Cities and Regions.
Circular Innovation Fair 2020 is an early stage circular innovations pitching event taking place on 26 November. This pitching and networking event for co-developed innovative circular design concepts and ideas is organised by Aalto University, GTK, Luke, SYKE and VTT.
The EU Circular Talks is a new exchange concept of the European Circular Economy Stakeholder Platform. It aims to encourage stakeholders to interact and discuss the circular economy topics on the Platform. The workshop aims to debate the role of the circular economy for the retail and wholesale sectors, particularly in the context of their recovery from the COVID-19 crisis.
"Research & Innovation in circular economy and bio-based systems: opportunities for circular economy stakeholders" is a side event organised by the European Commission's DG Research and Innovation. It will provide circular economy stakeholders with practical insight into current and future funding opportunities.
On 20 October 2020 at 13:15 – 17:30 (CET), the Competence Centre for Sustainable Procurement and the European Commission are organising the first online networking seminar for European Governmental Competence Centres for Sustainable Public Procurement and other governmental actors active in this field.
This competition for start-ups less than 5 years and located in Europe, aims at rewarding businesses that are facilitating Circular Economy innovations.
The European Commission today released the plan that sets the course of EU initiatives on the circular economy for the coming years.
In preparation for the Annual World Economic Forum (WEF) meeting in January 2020, PBL Netherlands and Utrecht University, in consultation with PACE, organised an international workshop on targets for a circular economy on 17 January 2020.
The first edition of the Circular Rethinking Academy - a winter school on Circular Economy - took place in Rovereto (Italy) from 3rd February to 5th March 2020.
The Beyond Growth -conference was held in Helsinki in October 2019. The conference report has been published.
Une centaine d’acteurs (décideurs, entreprises, collectivités, associations etc.) se sont réunis le lundi 27 janvier 2020 pour la conférence de l’Institut National de l’Économie Circulaire Loi anti-gaspillage pour une économie circulaire: quels changements pour les entreprises?
Delft University of Technology (TU Delft) is offering a 100 % online course on Sustainable Packaging in a Circular Economy.
A new web-portal to help cities become circular: the Circular City Funding Guide was launched 31 January 2020 at the Cities Forum in Porto, Portugal.
Due to the current Corona virus crisis, this year's annual Circular Economy Stakeholder Conference in Brussels has been postponed to a later date.
On the initiative of the ECESP coordination group Members Arthur ten Wolde (Ecopreneur.eu), Jean-Pierre Schweitzer (European Environment Bureau) and Chair Ladeja Godina Košir (Circular Change), an ECESP Breakfast meeting was organized on 29 January 2020 to introduce the Platform to MEPs working on the circular economy: achieving a circular economy through active stakeholder involvement.