You are here

Machines et équipement

15 Dec 2020 to 17 Dec 2020

Pantheon Performance Foundation is organising a series of webinars to take place on 15, 16 and 17 December 2020 from 3 to 4.30 p.m. (CET), focusing on policy, technology and practice in the field of reducing CO2 emissions from concrete manufacturing and use. It aims to draw up a manual of sustainable materials for CO2 neutral constructions.

Circular Navarre Catalogue

Circular Navarre Catalogue

The Circular Navarre Catalogue is a booklet showcasing 20 organisations - based on circular business models - in the Navarre region, who are looking for international cooperation. 

Krones' commitment: Sustainable packaging solutions for a circular economy

Country: 
EU

Relevant sectors:

Scope:

Commitment Targets
rPET Compatibility
To be achieved by: 
December 2025

By 2025, all new PET bottling lines will be suitable for processing up to 100% high-quality rPET without compromising output quality, efficiency or effectiveness.

Plastic-free secondary packaging
To be achieved by: 
December 2022

By 2022, alternative secondary packaging solutions free of disposable plastics will be available for every established SKU format multipack.

Advisory for recycling-friendly packaging design
Start Date: 
October 2020

Krones will leverage its technological expertise to help customers design packaging that specifically facilitates post-consumer recycling.

Upgrading from linear to circular economy
Start Date: 
October 2020

Krones will assist its customers to adapt existing lines in order to achieve the best possible outcomes when using recycled or renewable input materials.

Tethered caps
Start Date: 
October 2020

With immediate effect, Krones will make available capping equipment for tethered caps.

Sustainable labelling
Start Date: 
October 2020

Krones makes it possible to use detachable labels to enhance recyclability. It aims to make labels jointly recyclable with containers or to eliminate separate labelling.

Investing in recycling solutions
Start Date: 
October 2020

Krones will continue to allocate substantial R&D resources to its recycling technology division in order to facilitate physical recycling of post-consumer plastics.

Beyond PET packaging
Start Date: 
October 2020

Krones will actively explore disruptive new technologies delivering beverages to consumers without conventional PET packaging (e.g. pulp bottles, no-packaging solutions).

The European Manufacturers of Electrical Machines and Power Electronics are committed to Circular Economy

CEMEP
Author: 
CEMEP
Publication Date: 
07/2020
Country: 
Belgium

Language for original content:

Key Area:

Scope:

Contact: 
Jesper Jerlang
Didier Gufflet

The European Committee of Manufacturers of Electrical Machines and Power Electronics (CEMEP) supports the development towards a circular economy (CE), thus actively contributing to more sustainable manufacturing and responsible consumption. This industrial sector follows a business-to-business market model, delivering products for a wide number of economic sectors and applications. 

Its three main product groups – electric motors, variable speed drives and uninterruptable power systems – show differences and similarities when it comes to material efficiency, hence the need for sector- or product-specific approaches when pursuing CE.

This position paper describes the CE status of the CEMEP industries and the way forward towards more circularity.

CirQuality OWL – a production site closes loops

The CirQuality OWL project is funded by the EU (ERDF) and the Federal State North-Rhine Westfalia (NRW) with the aim of fostering the circular economy in the area.

Seven regional partners from the different fields (from energy to technologies to food to universities and associations) teamed up to use the circular economy to get the region off the ground in an innovative, crisis-proof, resilient and sustainable way. Together they are jointly striving for the following goals:

  • Discover Circular Economy (CE)
  • Regional capacity building
  • Qualifying stakeholders
  • Providing strategic support to stakeholders
  • Developing regional identity
  • Transfer results
20 Aug 2020 to 06 Oct 2020
Nordic Innovation

Nordic Innovation launches a series of workshops, free of charge, to develop collaborative pilots across industry ecosystems, that can be scaled to successful transition towards a circular economy, critical for innovation and economic growth around the Nordics.

The circular economy: Going digital

European Policy Centre

The European Policy Centre’s (EPC) Task Force called Digital Roadmap to Circular Economy has explored the linkages between digitalisation and circular economy, the opportunities created by data and digitally-enabled solutions, and the challenges associated with harnessing their full potential for the transition to a circular economy.

The project represents a pioneering endeavour in exploring the interconnections between the digital and green transformations and considers the implications for EU policymaking.

The final publication The circular economy: Going digital and its executive summary show that digitalisation can offer enormous possibilities for the transition to a more sustainable, circular economy but it is essential to steer it in the right direction.

Sporos Platform supports SMEs in Greece and Southeastern Europe

Sporos Platform Exclusive Roundtable

Type de plateforme ou réseau:

Financing, investment, impact and consultancy
Country: 
Greece

Language for original content:

Launched in November 2019, Sporos aims to become the first platform for impact investment and collaboration that adds value to SMEs in Greece and Southeastern Europe, on the basis of the Circular Economy.

Sporos utilises mezzanine sustainable financing tools, combined with consultancy services and environmental, social and governance (ESG) and sustainable development goal (SDG) metrics.

The Covid-19 recovery requires a resilient circular economy

The Covid-19 recovery requires a resilient circular economy

The coronavirus crisis has disastrous human and economic consequences, revealing our system's exposure to a variety of risks. As the pandemic forces us to adapt our daily lives in ways we would not have imagined, it is also challenging us to rethink the systems that underpin the economy.

While addressing public health consequences is clearly the priority, before the crisis, momentum had already been increasing around the need for a system reset, and the potential of a circular model.

Far from the pandemic pushing the circular economy agenda to the bottom of the list, this article by Jocelyn Blériot at the Ellen MacArthur Foundation highlights and reiterates that it is now more relevant than ever, and sets out to explore the wider possibilities for recovery.

Scaler Quick Guides – Helping industries increase efficiency through resource sharing

SCALER

SCALER provides mechanisms to accelerate the journey towards efficient and quick implementation of industrial symbiosis in the European process industry. They do this by developing action plans and adapted solutions to industrial stakeholders and communities.

SCALER works closely with a wide range of stakeholders including industrial networks, consultancies, researchers and policy makers at various geographic and political levels, to deliver practical tools and guidelines for industry actors engaging in resource efficiency, reuse and sharing.

To achieve this goal, SCALER is developing a set of reports and guides. They offer insights into how businesses can start industrial resource synergies with other companies to minimise their waste and create more value from their production.

Situational Analysis Report of Circular Economy in the Data Centre Industry

Situational Analysis of the Circular Economy in the Data Centre Industry

Type:

Author: 
WeLOOP, TND, LSBU, GreenIT Amsterdam, Wuppertal Institution, Team2, Operational Intelligence, Dialasheep, SIMS Recycling Solutions, Aliter Network
Publication Date: 
04/2020
Country: 
France, Germany, Netherlands, United Kingdom

Language for original content:

Contact: 
Naeem Adibi
Carolina Szablewski
Nil Atmaca

The Data Centre Industry (DCI) is one of the most important pillars of current technological and economic developments.

In DCIs, more than fifty different materials can be found per product, including ferrous, non-ferrous metals, precious metals (PM), platinum group metals (PGM), rare earth elements (REE), plastics and/or ceramics, some being considered as Critical Raw Materials (CRMs).

This assessment aims to study DCI design and material composition (specifically servers and switches), as well as to analyse their performance in a circular economy and provide recommendations for ecodesign guidelines.

Laundry by RacionaLUSO

 Local water recovery and reuse, Individual treatment of reuse water, EAS Projectos, Water reuse and energy recovery

RacionaLUSO offers a compact system that meets the recently-introduced Portuguese quality legislation for water reuse. With the availability of just 2m2, the system can treat 15m3 of water per day with a recovery efficiency of 80 % of water and 45.6 % of energy (thermal).

20 Dec 2019

ENEA, the Italian National Agency for New Technologies, Energy and Sustainable Economic Development, is carrying out research into lithium-sulphur batteries to make them more competitive.

CleanCup fights plastic pollution one reusable cup at a time

CleanCup logo

Type of organisation or company:

Country: 
France

Language for original content:

Scope:

CleanCup® distributes, collects and washes reusable cups automatically, on site, in order to eradicate the use of disposable cups and improve the way of drinking.

18 May 2020 to 20 May 2020
5th Symposium on Urban Mining and Circular Economy

Due to the COVID-19 public health emergency, the event is postponed to 18-20 Nov. 2020 in Venice, Italy.

Following the success of the fourth edition held in 2018, which saw the participation of almost 250 delegates from a wide variety of countries, SUM 2020 / the 5th Symposium on Urban Mining and Circular Economy will be held in May 2020 at the University of Bologna.

04 Oct 2019

Join the Cradle to Cradle Bouwgroep on 4 October 2019 in Rotterdam for a seminar and debate on Material Passports and circulair building projects. 

11 Sep 2019 to 12 Sep 2019

RWM, the UK's largest waste and recycling industry show, returns to Birmingham 11 to 12 October 2019

With Sika's adhesive, conveyor belts can be repaired on-site to save resources and increase longevity

Adhesives for rubber bonding support the circular economy

Type of organisation or company:

Country: 
Other (Switzerland)

Language for original content:

Key Area:

Scope:

Sika has developed a high-performance elastomer for the clean repair of the rubber substrate of conveyor belts and industrial rubber elements. This "liquid rubber" enables on-site repair and lengthens the product life of used belts.

Conference on the Circular Economy and Rational Use of Raw Materials

Abstract: 

Following successful 2017 and 2018 editions, both in Krakow, MEERI-PAS and the WRMC organised a 3rd edition of this conference in Racławice from 2 to 3 July 2019 for more than 200 participants.

The European Machine Tool Industry and the Circular Economy

The European Machine Tool Sector and the Circular Economy

CECIMO Circular Economy Report

Type:

Author: 
CECIMO - The European Association of the Machine Tool Industry and related Manufacturing Technologies
Publication Date: 
04/2019
Country: 
Belgium

Language for original content:

Scope:

Contact: 
Maitane Olabarria

CECIMO has published a report underlining how the shift towards a circular economy calls for a prominent role of manufacturing. Within it, the machine tool sector plays a crucial role. Machine tools already have multiple lifetimes and embrace some key principles of the circular economy. But there is always room for improvement.

The sector can invest in advanced manufacturing technologies, but also build upon the existing good practices. This would lead to improved productivity and resource efficiency, and consumers enjoying products that last longer and use less energy.

The report also makes recommendations to the industry and policy makers.

The garden, outdoor power and power tools industries have already implemented main principles of the EU circular economy policy

Garden, outdoor power and power tools industries contributing to the EU circular economy policy

Author: 
EGMF & EPTA
Publication Date: 
05/2019
Country: 
Belgium

Language for original content:

Scope:

Contact: 
Contact

The garden, outdoor power and power tools industries have developed a joint position paper on the different principles of the circular economy the industries are already applying.

Given the proximity to nature and to the natural environment, these industries are committed towards protecting the environment and are already taking measures to minimise the life-cycle impact of products in the environment addressing the following issues:

  • Design of durable and reliable products
  • Application of material efficiency and hazardous substances substitution
  • Limiting noise and exhaust emissions
  • Reparability and extending product lifetime
  • Integrating recyclability and safe waste management aspects at the design stage
  • Limiting packaging and its impacts
  • New business models

More details on the specific measures can be found in the position paper.

C-SERVEES

C-SERVEES Platform

C-SERVEES is a network aiming at activating Circular Services in the Electric and Electronic Sector through the development, testing, validation and transfer of new circular economic business models based on systemic eco-innovative services that include:

  • eco-leasing of electrical and electronic equipment (EEE),
  • product customization,
  • improved management of waste of electrical and electronic equipment (WEEE),
  • and ICT services to support the other eco-services.

ICT tools (relying on QR codes) will be developed as the driver of the proposed eco-innovative services to take full advantage of the potential and synergies of two major revolutions of our time: the circular economy and the Industry 4.0.

C-SERVEES will contribute to transform the E&E sector into circular and 4.0, raising new opportunities for end-users (such as their involvement in design or the access to a product as a service) and for social and solidarity economy (conducted by NGOs employing people at risk of social exclusion to repair and prepare WEEE for re-use). The techno-economic, environmental and social viability of the new circular economy business models will be validated through demonstrations dealing with four target products: washing machines, toner cartridges, telecom equipment and TVs.

 

By experimenting with recycled water bottles as material for internal components, Océ discovered the drivers and barriers to using recycled plastic in manufacturing

varioprint 135 circular economy

Type of organisation or company:

Country: 
Netherlands

Language for original content:

Scope:

In designing the varioPrint 135, Océ partnered with the Netherlands Enterprise Agency and Philips to experiment with the use of recycled plastic in the production of industrial printers. The company has made a further step towards circular economy and succeeded in developing an internal component that contains at least 30% post-consumer recycled polycarbonate.

Pages