Everything is transformed - a new look at waste is an educational campaign. It aims to involve students from secondary and primary schools in Italy to promote a more circular approach to waste management.
You are here
Gestion des déchets
From the production of agricultural lime to summer barbecues, olive pits make a perfect circular fuel
KLIMIS has been using the woody part of Greek olive pits as heating fuel for its kiln in order to bake lime stones since 1968. In 1992, it developed a patented process to recycle the residual material from this combustion into highly-efficient, low-emission barbecue briquettes.
The Centro de Documentación Europea de la Universidad Francisco de Vitoria (European Documentation Centre, UFV) has completed a project titled Economía Circular y Empleabilidad de los Jóvenes en la Comunidad de Madrid (Circular Economy and Employability of Young People in the Autonomous Region of Madrid).
The outcomes include a report on communicating the circular economy through the lens of employment opportunities circular business models provide for young people. The project has also created a guide on communicating the circular economy to students, which introduces the subject, presents the 7R model and shows how innovative companies provide opportunities for employment in circular business.
Start-up of a microalgae-based treatment system within the biorefinery concept: from wastewater to bioproducts
Within the European project INCOVER, an experimental plant uses low-energy photobioreactors to cultivate micro-algae and transform wastewater into bioproducts.
This article describes this new experimental plant and the start-up stage, starting from the new design of three semi-closed horizontal photobioreactors with low energy requirements, for microalgae cultivation (30 m3 total), using agricultural runoff and urban wastewater as feedstock.
The inflow nutrients concentration is adjusted to select cyanobacteria, microalgae able to accumulate polyhydroxybutyrates, which can be used for bioplastics production. Part of the harvested biomass is used as substrate for anaerobic co-digestion (AcoD) with secondary sludge to obtain biogas. This biogas is then cleaned in an absorption column to reach methane concentration up to 99%. The digestate from the AcoD is further processed in sludge wetlands for stabilization and biofertilizer production.
On the other hand, treated water undergoes ultrafiltration and disinfection through a solar-driven process, then it is pumped through absorption materials to recover nutrients, and eventually applied in an agricultural field to grow energy crops by means of a smart irrigation system. This plant presents a sustainable approach for wastewater management, which can be seen as a resource recovery process, more than a waste treatment.
The publication presents a state-of-play for Slovakia's circular economy transition and introduces its circular economy policies. It also contains interviews with representatives of the Slovak State administration, NGO representatives and scientists, as well as examples of good practices from municipalities, businesses, and NGOs.
With an average of 79.5% recycled across Europe in 2016, steel for packaging is already the most recycled packaging material in Europe.
This report compiles examples of good practices from countries across the EU showcasing the varied projects, systems and processes by which steel for packaging is recycled, bringing significant reduction in emissions, resource and energy use.
Steel, a permanent material that can be infinitely recycled to make high quality products, can be easily sorted from the waste stream owing to its magnetic properties which make it the most economical packaging material to collect, sort and recycle over and over again.
Good practices in separate collection, sorting and recycling of steel for packaging contribute to improving its recycling rate, but can also serve as a guide for any stakeholder interested in improving these essential steps in a circular perspective.
Gumdrop Ltd is the first company in the world to recycle and process chewing gum into a range of products such as boots or phone covers that can be used in the rubber and plastics industry.
The European Recycling Industries’ Confederation will hold its annual conference, entitled Implementing Circular Value Chains, in Brussels on 13 March 2019.
The conference Fast-tracking a Circular Economy in the EU will take stock of actions aimed at advancing towards a circular economy.
EREK will hold its first webinar on 19th March 2019. The event will be co-organised by ADEME and will focus on the lessons learned from delivering resource efficiency support programmes in Europe. It will focus on the cases of France, Scotland, and Estonia, with speakers from those countries.
On 19 February 2019 the European Parliament and ACR+ hosted experts and practitioners from local and regional authorities, training providers, NGOs and academia across Europe.
C-SERVEES is a network aiming at activating Circular Services in the Electric and Electronic Sector through the development, testing, validation and transfer of new circular economic business models based on systemic eco-innovative services that include:
- eco-leasing of electrical and electronic equipment (EEE),
- product customization,
- improved management of waste of electrical and electronic equipment (WEEE),
- and ICT services to support the other eco-services.
ICT tools (relying on QR codes) will be developed as the driver of the proposed eco-innovative services to take full advantage of the potential and synergies of two major revolutions of our time: the circular economy and the Industry 4.0.
C-SERVEES will contribute to transform the E&E sector into circular and 4.0, raising new opportunities for end-users (such as their involvement in design or the access to a product as a service) and for social and solidarity economy (conducted by NGOs employing people at risk of social exclusion to repair and prepare WEEE for re-use). The techno-economic, environmental and social viability of the new circular economy business models will be validated through demonstrations dealing with four target products: washing machines, toner cartridges, telecom equipment and TVs.
C-SERVEES is a European project that aims to boost a resource-efficient circular economy in the electrical and electronic (E&E) sector through the development, testing, validation and transfer of new circular economic business models based on systemic eco-innovative services.
The African Circular Economy Network (ACEN) is a registered Non-Profit Organisation in South Africa (195-590 NPO).
Its vision is to build a restorative African economy that generates well-being and prosperity inclusive of all its people, through new forms of economic production and consumption which maintain and regenerate its environmental resources.
The research activities of the ACEN will investigate issues, document findings relevant for the African context and its needs. Researchers will be drawn from ACEN members, academics and other stakeholder partners across Africa, but also Europe, Asia or America, where needed.
Training and Awareness
The priority of ACEN is to raise awareness and undertake training amongst key sectors of the African economy: public (government, educational institutions), private (corporates & SMEs), and civil society (non-governmental organisations) to promote the concept, benefits, principles and practice of the Circular Economy.
Networking and Events
ACEN believes that solutions to current challenges require inter-disciplinary skills, multiple stakeholder involvement and regional, African as well as international partnerships. It therefore aims to create platforms where specialists can collaborate to exchange ideas, experiences and solutions. ACEN has hosted several stakeholder engagements to date to enable a global reach. Members from the Ellen MacArthur Foundation (UK), Pavia University (Italy), the South African/European Union Partnership (South Africa), the World Economic Forum (Switzerland) and Green Alliance (UK), to name a few, have joined the discussion.
ACEN currently disseminates and shares knowledge about the circular economy through LinkedIn and Facebook, and in the future, will also use other online channels to develop a strong base of knowledge and information and extend its reach throughout South Africa and Africa.
The network is active in over 24 countries. In 2017 it co-organised the first Circular Economy Conference in Africa with the European Union and the South African Government (World Economic Forum Africa, Durban). It is engaged with the EU to discuss approaches on ways to be inspired by the African continent and enable more circular strategies (less negative impact), and with training, research and knowledge sharing with corporate and universities.
Join five inspiring speakers to hear the latest thinking on circular economy at TedXParcduCinquantenaire, to be hosted hosted by the European Commission on the 5th of March in Brussels.
After the 2014 elections, the new Roubaix municipality team wanted to change the image of its city and encourage a positive attitude towards both its inhabitants and France as a whole.
The roadmap aims at turning difficulties into advantages, generating a new dynamic. Based on the Sustainable development strategy (since 2003), a zero waste policy is progressively implemented with a focus on cooperation and awareness raising among the stakeholders.
The approach is global, even if some activities are implemented on a micro-scale (budget issue), mostly at the level of a city sub-district (Fresnoy-Mackellerie).
To enable the entire City of Roubaix to experience the transition to a zero waste economy, projects are open and accessible to all categories of population and businesses. This is reflected in the way the projects are designed and co-developed, and how the City communicates about them.
Some concrete solutions are tested on an everyday basis and feedback is already shared with others (zero waste family program, zero waste business label, zero waste festival…).
Generally speaking, the City of Roubaix wants :
- to have the largest possible audience sharing the zero waste concepts, to match activities that could bring new dynamics into this field and make it happen. The more people share the same values the better;
- to multiply the interaction at different levels (inhabitants, institutions, businesses) but also to keep a global coherent approach;
- to minimize the production of waste, by changing consumer’s behaviour, retailer distribution methods and the design and processing used by the companies;
- to make the remaining and really unavoidable waste enter a circular loop.
On 7 March the European Commission will host a workshop to inform stakeholders about the product environmental footprint, its development and possible contribution to a Single Market for Green Products.
The LIFE EPS SURE project aims to offer a technically, environmentally and economically viable solution that allows EPS fish boxes to be collected, washed and converted into new PS food contact packaging, thus closing the loop.