You are here

Electronics

C-SERVEES

C-SERVEES Platform

C-SERVEES is a network aiming at activating Circular Services in the Electric and Electronic Sector through the development, testing, validation and transfer of new circular economic business models based on systemic eco-innovative services that include:

  • eco-leasing of electrical and electronic equipment (EEE),
  • product customization,
  • improved management of waste of electrical and electronic equipment (WEEE),
  • and ICT services to support the other eco-services.

ICT tools (relying on QR codes) will be developed as the driver of the proposed eco-innovative services to take full advantage of the potential and synergies of two major revolutions of our time: the circular economy and the Industry 4.0.

C-SERVEES will contribute to transform the E&E sector into circular and 4.0, raising new opportunities for end-users (such as their involvement in design or the access to a product as a service) and for social and solidarity economy (conducted by NGOs employing people at risk of social exclusion to repair and prepare WEEE for re-use). The techno-economic, environmental and social viability of the new circular economy business models will be validated through demonstrations dealing with four target products: washing machines, toner cartridges, telecom equipment and TVs.

 

C-SERVEES: Activating Circular Services in the Electric and Electronic Sector

Overview of C-SERVEES project

Type of organisation or company:

Country: 
EU

Language for original content:

Scope:

C-SERVEES is a European project that aims to boost a resource-efficient circular economy in the electrical and electronic (E&E) sector through the development, testing, validation and transfer of new circular economic business models based on systemic eco-innovative services that include:

  • eco-leasing of electrical and electronic equipment (EEE),
  • product customization,
  • improved management of waste of electrical and electronic equipment (WEEE),
  • and ICT services to support the other eco-services.

ReWeee: Reducing Waste Electrical and Electronic Equipment in Greece

Reweee project

Type of organisation or company:

Country: 
Greece

Language for original content:

Scope:

The ReWeee Project aims to prevent the creation of Waste Electrical and Electronic Equipment (WEEE) and to demonstrate that WEEE can be efficiently sorted and re-used.

24 Jan 2019
Circular Electronics Day
Country: 
Other (World)

Sector:

Scope:

Encourage individuals and organizations to contribute to a more sustainable use of electronics by sharing tips and inspiring others to re-use products with the hashtag #CircularElectronicsDay!

Luxembourg at the forefront of WEEE processing in Europe

Management of WEEE

Type of organisation or company:

Country: 
Luxembourg

Language for original content:

Ecotrel is the waste electrical and electronic equipment (EEE) recycling association for all of Luxembourg which has recently launched a "circularity and solidarity cluster" of business and social enterprises. These take back WEEE in order to re-use, disassemble or recycle it, and also to delete the personal data still stored in electronic waste.

28 Nov 2018 to 30 Nov 2018

G-STIC 2018 builds onto the key findings of G-STIC 2017, which demonstrate that a transition to a new industry framework requires a circular economy approach that is enabled by smart technologies.

20 Sep 2018
circular brands logo

CIRCULAR BRANDS is a pioneering program designed to empower the top brands in NL to make circular brand and business innovation reality. Register for the next workshop in Amsterdam on September 20th - there's place for 6 more brand teams to join and accelerate their transformation in becoming circular brand leaders, creating business growth and positive impact by driving the circular economy culture.

Fairphone created the world's first ethical, modular smartphone

fairphone modular design

Type of organisation or company:

Country: 
Netherlands

Language for original content:

The Fairphone 2, launched in 2015, is one of the first modular smartphones, with components designed for longer use first and refurbishment when they finally break down. 

Cleanteach-Cluster Upper Austria

Logo Cleantech-Cluster

The Upper Autrian Cleantech-Cluster networks all actors from the resource supplier, to the manufacturer, industrial researcher, to mechanical engineers, recyclers, and disposers in order to find joint solutions and develop new technologies. We cooperate with our 10 cluster initiatives in the Upper Austrian business support agency and 2000 partner companies, whose activities range from plastics, to automotive, furniture and wood construction, food, medical technology, mechatronics, IT, logistics, and HR, In order to support projects for SMEs in particular, the cluster also supports EU funding applications, thus offering its partners an internationally mature circular economy toolbox.

THEMES and EXPERTISE in the network:

  • Material efficiency in production
  • Recycling
  • Recovery
  • Disposal
  • Circular design
  • Business Models
  • Initial and continuing education
  • Research

SERVICES:

  • Cross-sector networking with researchers, companies, associations (regional, national, international)
  • Project development
  • Project Management
  • Process support through conception, moderation of workshops, work meetings, events
  • Funding advice

Die Oekonomischen auswirkungen einer Verbesserung des Deutschen Gewaehrleistungsrechts

Study on the economic impact of extending warranty rights in Europe

Type:

Author: 
Kilian Bizer, Martin Fuehr, Till Proeger
Publication Date: 
09/2016
Country: 
Germany

Language for original content:

Scope:

Contact: 
Otmar Lell

The study analysed the economic effects of the transposition of Directive 1999/44/EC concerning warranty rights, which had to be transposed into national law by January 2002. A number of publications had suggested that strengthening warranty rights for consumer goods as foreseen in the directive could increase the price level of these goods, possibly resulting in a reduced purchases. The study addressed both questions by analysing data from several EU countries. The first question was addressed by analysing inflation rates of general prices and of prices for the consumer goods affected by the directive in the time period 1998 until 2002. The second question was analysed by looking at the share of consumers who used online consumer-to-consumer markets, which were not covered by the warranty rights foreseen in the directive.

The comparison of inflation rates for consumer goods showed that inflation rates for consumer goods were below the general inflation rate between 1998 and 2004. Therefore, between 1998 and 2004 prices for the different groups of consumer goods covered by the directive did not increase but actually appear to have decreased slightly. This effect has been found for all countries analysed with no significant differences between countries transposing the minimum standards and those that went beyond. The second part of the analysis addressed the question if a developed market for online consumer-to-consumer selling of goods exists, for which the new seller's warranties weren't valid. In case of price increases for business-to-consumer markets – which have not been found in the first part of the analysis – part of the transactions could be transferred to these markets. The analysis showed that the vast majority of consumers in Western European countries used the internet regularly to purchase goods, including the online-platform Ebay. In case of increasing prices for consumer goods because of strengthened warranty rights, part of the transactions would move to online consumer-to-consumer markets rather than resulting in an overall decline of consumer goods purchases. The general conclusion was that over the analysed time period no negative impact of strengthened warranty rights on the price level of consumer goods could be found.

Brussels Regional Programme for Circular Economy

Publication Date: 
03/2016
Country: 
Belgium

Language for original content:

Scope:

Strategy level:

Contact: 
Joana Cruz
Catherine Vanderstichelen

The Brussels Regional Programme for Circular Economy (BRPCE) is an integrated strategy involving 111 measures aimed at delivering circular patterns at the city level. The main objectives of the BPRCE are:

  • to transform environmental objectives into economic opportunities
  • to anchor economic activities within Brussels’ borders, maximising resource circularity and boosting entrepreneurship, and
  • to create new employment opportunities.

London Waste and Recycling is delivering on the circular economy with stakeholder buy-in

Type of organisation or company:

Country: 
United Kingdom

Language for original content:

Scope:

London is among one the world’s most cosmopolitan and oldest cities, with a history spanning nearly two millennia, and one of the most cosmopolitan. As Britain’s largest city and country’s economic, transportation and cultural capital, over 8 million people live in London. The city is growing fast and its population is predicted to reach over 11 million by 2050. A more flexible and sustainable approach to products, housing, office space and critical infrastructure is crucial to London’s ability to adapt and grow.

05 Sep 2018
Circular Impacts Final Conference

For the past 2 years, the CIRCULAR IMPACTS project has been collecting evindence on the impacts of moving towards a Circular Economy in Europe. On September 5th the project team will present its final report at an afternoon conference in Brussels with live feedback from the European Commission, whom these assessments aim to help in discussions with member states and civil society on progress in this field.

26 Nov 2018 to 29 Nov 2018
CARE-electronics

The International CARE Electronics Office is pleased to announce the Going Green – CARE INNOVATION 2018 conference and exhibition on Electronics and the Environment. It will take place in Vienna's Schoenbrunn Palace Conference Centre, which is situated in the Apothecaries’ Wing of the famous building. This 7th International Symposium and Environmental Exhibition, titled 'Towards a Resource Efficient Economy', is the platform to present the state of play of sustainable development and the development of eco-efficient electr(on)ic & automotive products.

Waste prevention in Europe - policies, status and trends in reuse in 2017

Waste prevention in Europe - policies, status and trends in reuse in 2017

Cover EEA report 4 2018

Type:

Author: 
Henning Wilts, Bettina Bahn-Walkowiak, Ybele Hoogeveen
Publication Date: 
06/2018
Country: 
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, EU, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, United Kingdom

Language for original content:

Scope:

Contact: 
Ybele Hoogeveen

This is the fourth EEA report in a series of annual reviews of waste prevention programmes in Europe as stipulated in the European Union (EU) Waste Framework Directive.

This review focuses on reuse and covers 33 national and regional waste prevention programmes that had been adopted by the end of 2017.

Article 11 of the Waste Framework Directive states that Member States should take appropriate measures to promote reuse and preparing for reuse such as encouraging the establishment and support of reuse and repair networks. The report describes how reuse is addressed in the waste prevention programmes and provides data on the status of and trends in reuse systems in Europe. Chapter 1 introduces the concept of waste prevention in a circular economy and describes the policy background. It explains the review's approach and defines key terms used. Chapter 2 investigates the existing waste prevention programmes, looking at their scope and reuse objectives, measures and indicators, as well as the sectors and stakeholders addressed. Chapter 3 examines the status of and potential for reuse for key product groups (i.e. textiles, electrical and electronic equipment, furniture, vehicles, and buildings and building components). Chapter 4 concludes with key findings and prospects for reuse in the context of the circular economy agenda.

22 Jun 2018
closing the circularity gap logo

Our world is only 9.1% circular and creating a more prosperous world requires personal, political and business leadership. But what can you do to accelerate the transition towards a circular economy?

 

7 Jun 2018
An innovation from SUEZ makes its European debut: a process to recover non-ferrous metals from bottom ash produced by the waste-to-energy activities.

Organix, the digital platform dedicated to organic waste, is extending its offer to the entire French territory

Pages